| Specifications: |
| Model |
|
SDL-526-XXXT |
| Output
Power @ 25 ¡æ |
|
1-100mW |
| Wavelength |
|
526¡À1nm |
| Operation
Mode |
|
CW,
TEM00 |
| Power stability after warm-up |
|
<1%, <3%, <5%
(over
2/4/8 hours) |
Warm-up
time |
|
< 10 minutes |
| M2
factor |
|
<1. 2 |
|
Beam
Divergence (1/e2, Full Angle) |
|
<
1.5mrad |
| Beam
diameter at the aperture |
|
~2.0mm |
| Beam height from base plate (mm) |
|
24. 8mm |
| Polarization
ratio |
|
>100:1 (0 or 90 degree) |
| Point
stability after warm-up |
|
<0.05mrad |
| Operating
temperature |
10¡æ¡«35¡æ |
| Dimensions
of Laser head |
|
142
¡Á 73 ¡Á 46mm |
| Power
supply |
|
SDL-PS-300 |
| Input Voltage |
|
90-264VAC or 5V DC |
| Modulation |
TTL
Modulation or Analog Modulation |
| Expect life time |
|
10000 hours |
| Warranty time |
|
1 year |
| Note:
|
 |
See
the
Glossary and Technology
for information about the terms
used |
|
In
the front of the laser, we add
an infrared filter. The residual
IR part is less than 10-3. Please
refer to the
technology page for more information
about the filter. |
|
Other
Sytles and custom designs are
available. Contact us to discuss
your needs. |
|
|
|
